Numark DJ|iO - Setup in Numark CUE

1 1 1 1 1


numark djio mainThe following guide walks through two different configurations of the DJ|iO in the Numark CUE software.

Before you begin be sure that you have downloaded the latest drivers for your computer from www.numark.com/djio

Contents

Internal Mixer

If you plan on using a hardware controller to control the internal mixer in CUE and the DJ|iO as your sound card, use the following setup:

PC: 

Go to CONFIG then the Sound Setup tab:

Inputs: None
Outputs: Headphones (Channels 1/2 main 3/4 Headphones)
Sound Card: 4.1 Card > Numark

Click [APPLY]

When the headphone configuration is used, Output 1 on the back of the unit will act as the Master output. Connect a set of powered speakers to the RCA Output 1 and a set of headphones to the headphone output on the front of the unit.

MAC: 

Go to CONFIG then the Sound Setup tab:

Inputs: None
Outputs: Headphones (Channels 1/2 main 3/4 headphones)
Sound Card: 4.1 Card > Numark

Click [APPLY]

When the headphone configuration is used, Output 1 on the back of the unit will act as the Master output. Connect a set of powered speakers to the RCA Output 1 and a set of headphones to the headphone output on the front of the unit.

 

External Mixer

If you plan on using an external mixer and would like to connect the output from the left and right decks to the two channels of your mixer, follow these steps:

PC: 

Go to CONFIG then the Sound Setup tab:

Inputs: None
Outputs: External Mixer (Deck 1: Chan 1&2 / Deck 2: Chan 3&4)
Sound Card: ASIO > Numark USB

Connect OUTPUT 1 on the back of the DJ|iO to the line input 1 of your DJ Mixer. Connect OUTPUT 2 to line input 2. 

You can now connect your headphones into your mixer, and then use the CUE/PFL buttons to select which channel is sent to the CUE mix.

MAC: 

Go to CONFIG then the Sound Setup tab:

Inputs: None
Outputs: External Mixer (Deck 1: Chan 1&2 / Deck 2: Chan 3&4)
Sound Card: 4.1 Card > Numark

Connect OUTPUT 1 on the back of the DJ|iO to the line input 1 of your DJ Mixer. Connect OUTPUT 2 to line input 2. 

You can now connect your headphones into your mixer, and then use the CUE/PFL buttons to select which channel is sent to the CUE mix. 

 

Numark Technical Support

Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.

www.numark.com/support

 

Popular

Latest Articles